Watch Service

Saint Louis

Watch Technicians service procedure is designed to ensure that every watch that leaves our Service Center complies with its original functional and aesthetic specifications. We completely overhaul each movement, while restoring the lustre of the case and bracelet with a meticulous finish (optional by request).

In order to guarantee the level of quality and reliability you expect from a Watch Technicians’ service we thoroughly test accuracy, water resistance and water proofness throughout the process and again at the end.  

Important: After the service and before you wear your watch for the first time it must be wound. Firstly locate the crown and unscrew it to the winding position, secondly turn it clockwise approximately 20-40 times – depends on the manufacture specifications. Finally it is vital that the crown is screwed back down against the case, this will guarantee the watch remains sealed against any leaks of water, air or dust.

Watch Service Saint Louis

Watch Technicians service procedure is designed to ensure that every watch that leaves our Service Center complies with its original functional and aesthetic specifications. We completely overhaul each movement, while restoring the lustre of the case and bracelet with a meticulous finish (optional by request).

In order to guarantee the level of quality and reliability you expect from a Watch Technicians’ service we thoroughly test accuracy, water resistance and water proofness throughout the process and again at the end.  

Important: After the service and before you wear your watch for the first time it must be wound. Firstly locate the crown and unscrew it to the winding position, secondly turn it clockwise approximately 20-40 times – depends on the manufacture specifications. Finally it is vital that the crown is screwed back down against the case, this will guarantee the watch remains sealed against any leaks of water, air or dust.

Rolex repair service St Louis polish

Step 1: DISASSEMBLY 

 To begin we disconnect the bracelet from the watch case. After opening the case we remove the movement. Finally we completely take apart the case.

Step 2: Cleaning the Movement 

 After dismantling the movement, specially formulated solutions are used to ultrasonically clean each component.

Step 3: Replacement of Components (if needed)

 Watch technicians carefully examine each component closely to identify which movement components need to be replaced. We only use genuine parts from authorised suppliers.

 

Step 4: Lubrication & Reassembly 

 Each of the movement’s functional components are carefully lubricated to operate with minimum friction and prevent wear. By doing this Watch Technicians can ensure that your timepiece continues to perform accurately.

Step 5: Timing Calibrations

 With a frequency of 690,000 beats per day your timepiece’s balance wheel regulates the movement in the watch’s components. Watch Technicians precisely adjust the balance wheel, then electronically test the wheel’s timing accuracy. Finally over the following couple of days our experts closely observe and verify your watch’s performance.

 

Rolex repair service St Louis polish
Rolex repair service St Louis polish

Step 6: Refinishing the Case & Bracelet (Optional)

 Watch Technicians bring the same keen eye for detail to service your timepiece’s case and bracelet as for the movement. After the initial cleaning, the case and bracelet of your watch are closely examined and any worn or damaged components replaced with genuine parts. To restore that beautiful lustre we ultrasonically clean and refinish your case and bracelet.

Step 7:  Case Reassembly 

 With the utmost care Watch Technicians replace all the seals to guarantee the watch is waterproof.

 

Step 8: Waterproof Tests (Seal)

 Rigorous testing is applied to the watch case to make sure it meets pressure resistance requirements. Watch Technicians perform a vacuum test, a compression test and a condensation test.  This enables us to ensure that not even the most minute amount of water can breach the case.

Step 9:  Final Quality Control

 Watch Technicians perform thorough quality tests and checks all through the service process. For the final check we again confirm that your timepiece’s timing accuracy, power reserve and aesthetic appearance are correct and in line with the manufacturer’s specifications and the superb standard of quality one expects from Watch Technicians. 

 

Rolex repair service St Louis polish

Watchtechnicians.com is an independent institution with no affiliation to any of the brands listed or depicted within our site. All brands listed on Watchtechnicians.com are trademarks of their respective holders. Terms and Conditions and Privacy Policy

Watch Or Jewelry Repair
10% OFF
Jewelry or Watch Repair
10% OFF
Watch Cleaning
Jewelry
Cleaning Kit
Jewelry or Watch Repair
10% OFF
Free WT Wood
Watch
Jewelry or Watch Repair
10% OFF
Free Watch Battery
Watch Or Jewelry Repair
10% OFF
50% OFF
Ring Sizing
Seiko Watch
Jewelry
Cleaning Kit
Watch Technicians' Spin & Win
Enter your email address and spin the wheel. This is your chance to win amazing discounts & prizes!
Watch Technicians' in-house rules:
  • One game per user
  • Cheaters will be disqualified.